CLFLB - SCOTCHCAST BRAND ELECTRICAL RESIN 251, PART B (SEE SUPPL)

  • MSDS: CLFLB
  • Manufacturer: 3M CO ELECTRICAL PRODUCTS DIV
  • Product Name: SCOTCHCAST BRAND ELECTRICAL RESIN 251, PART B (SEE SUPPL)
  • National Stock Number: 5970-00-900-4414
Product Identification

Product ID:SCOTCHCAST BRAND ELECTRICAL RESIN 251, PART B (SEE SUPPL)
MSDS Date:08/24/1992
FSC:5970
NIIN:00-900-4414
Status Code:A
Kit Part:Y
MSDS Number: CLFLB

Responsible Party
3M CO, ELECTRICAL PRODUCTS DIV.
3M CENTER OFFICES, 3M CENTER
ST PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 75037

Contractor
MINNESOTA MINING AND MFG CO ELECTRICAL PRODUCTS DIV
AUSTIN, TX 78769-2963 US

Telephone: 512-984-1800

Cage: 75037

Ingredients

TALC (CONTAINING ASBESTOS)

CAS: 14807-96-6

RTECS: MW2700000

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 0.2 FIBERS/CC; 9394


HEXAHYDROPHTHALIC ANHYDRIDE

CAS: 85-42-7


ORGANIC ACIDS ANHYDRIDE


2,4,6-TRIS(DIMETHYLAMINO METHYL) PHENOL

CAS: 90-72-2

RTECS: SN3500000

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYES: CORROSIVE. SKIN: ALLERGIC SKIN
REACTION, MODERATE SKIN IRRITATION. MAY BE ABSORBED THROUGH THE
SKIN. INHALATION: ALLERGIC RESPIRATORY REACTION, CENTRAL NERVOUS
SYSTEM DEPRESSION, IRRITATION OF THE UPPER RESPIRATORY TRACT.
INGESTION: IRRITATION OF GASTROINTESTINAL TISSUES.
Effects of Overexposure:SKIN: REDNESS, SWELLING, BLISTERING, & ITCHING.
DRYNESS. INHALATION: DIFFICULTY BREATHING, WHEEZING, TIGHTNESS OF
CHEST & RESPIRATORY FAILURE. HEADACHE, DIZZINESS, DROWSINESS,
DROWSINESS, INCOORDINA TION, SLOWED REACTION TIME, SLURRED SPEECH,
GIDDINESS & UNCONSCIOUSNESS. SORENESS OF THE NOSE & THROAT,
COUGHING & SNEEZING. INGESTION: PAIN, VOMITING, ABDOMINAL
TENDERNESS, NAUSEA, BLOOD IN VOMITUS, AND BLOOD IN FECES.

First Aid

First Aid:EYES: IMMEDIATELY FLUSH EYES WITH LARGE AMOUNTS OF WATER FOR
AT LEAST 15 MINUTES. GET IMMEDIATE MEDICAL ATTENTION. SKIN: FLUSH
SKIN WITH LARGE AMOUNTS OF WATER. IF IRRITATION PERSISTS, GET
MEDICAL AT TENTION. INHALATION: IF SIGNS/SYMPTOMS OCCUR, REMOVE
PERSON TO FRESH AIR, IF SIGNS/SYMPTOMS CONTINUE, CALL A PHYSICIAN.
INGESTION: DRINK TWO GLASSES OF WATER. CALL A PHYSICIAN.

Fire Fighting

Flash Point Method:CC
Flash Point:>148.9C, 300.F
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING, INCLUDING
HELMET, SELF-CONTAINED, POSITIVE PRESSURE OR PRESSURE DEMAND
BREATHING APPARATUS, BUNKER COAT AND PANTS, BANDS AROUND ARMS,
WAIST & LEGS, FACE MASK, & PROTECTI VE COVERING FOR EXPOSED AREAS
OF THE HEAD.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:OBSERVE ALL PRECAUTIONS GIVEN. APPLY ABSORBENT
MATERIAL TO SPILL AREA. COLLECT AND PLACE IN CLOSABLE CONTAINER.

Handling

Handling and Storage Precautions:KEEP OUT OF THE REACH OF CHILDREN.
Other Precautions:DO NOT INGEST.

Exposure Controls

Respiratory Protection:SELECT ONE OF THE FOLLOWING NIOSH APPROVED
RESPIRATORS BASED ON AIRBORNE CONCENTRATIONS OF CONTAMINANTS & IN
ACCORDANCE WITH OSHA REGULATIONS: HALF-MASK ORGANIC VAPOR
RESPIRATOR.
Ventilation:USE WITH APPROPRIATE LOCAL EXHAUST VENTILATION. PROVIDE
APPROPRIATE LOCAL EXHAUST FOR HEAT CURING. USE RESPIRATORY
PROTECTION IF NEEDED.
Protective Gloves:WEAR APPROPRIATE GLOVES.
Eye Protection:WEAR UNVENTED GOGGLES.
Other Protective Equipment:USE ONE OR MORE OF THE FOLLOWING PERSONAL
PROTECTION ITEMS AS NECESSARY TO PREVENT SKIN CONTACT: APRON,
COVERALLS.
Supplemental Safety and Health
THIS MSDS IS FOR ONE PART OF A KIT (SCOTCHCAST BRAND ELECTRICAL RESIN
251). THE HMIS SERIAL NUMBERS FOR ALL PARTS OF THIS KIT
(INCLUDING THE ONE FOR THIS MSDS) ARE: CLFKZ & CLFLB.

Chemical Properties

HCC:V5
Spec Gravity:1.48
Viscosity:100 POISE
Solubility in Water:NEG
Appearance and Odor:BUFF VISCOUS LIQUID, PUNGENT ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.

Disposal

Waste Disposal Methods:INCINERATE IN AN INDUSTRIAL OR COMMERCIAL
FACILITY. DISPOSE OF COMPLETELY ABSORBED WASTE PRODUCT IN A
SANITARY LANDFILL. DISPOSE OF COMPLETELY CURED (OR POLYMERIZED)
MATERIAL IN A SANITARY LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.